fanairnew.jpg (75950 bytes)FanAir Company
Fiberglass "FRP" Blowers

Description:
Fiberglass Reinforced Plastic - FRP Blowers designed and constructed for high resistance to Acids. Blowers are custom molded using hand lay-up and chopped strand methods. A "C" type surface Veil wetted with Vinylester resin is used for a glass smooth airstream.  Additional structural layers of cross linked fiberglass mat and/or chopped strand are added to make up structural corrosion barrier layers for additional strength and chemical resistance.

Impellers are constructed typically using Vinylester Resin due to high strength and housings constructed using Fire Retardant resins and or antimony trioxide  to attain a Class I, E-84 Flame Spread rating of 25 or less, to satisfy UL, FM or local code requirements.  

Additionally Graphite may be mixed with resin and a copper bonding cable may be added to statically ground the blower assembly and prevent a static discharge. 

The above FRP construction methods make these blowers the ultimate in chemical and corrosion resistant in addition to being inherently spark resistant, fire retardant with a low flame and low smoke density level.

For Fiberglass Axial Fans select this link.........

Applications:

  • Fume Scrubbers
  • Bio-Filters
  • Bio-Towers
  • Air Stripping Towers
  • Acid Scrubbers
  • Ammonia Scrubbers
  • Plating Scrubbers
  • Pump / Lift Station Exhaust
  • Hydro Fluoric Acid Exhaust
  • Chromic Acid Exhaust
  • Carbon Filter Supply
  • Sulfuric Acid Exhaust
  • Metals Processing Exhaust
  • Chlorine Scrubber Exhaust
  • Process Gas
  • Concentrated Flue Gas
  • Sulfur Dioxide
  • Hydrogen Sulfide
  • Aqua Regia
  • Perchloric Acid
  • Sodium Hypochlorite

 
 Made in the USA  

Available Sizes:
From 8" to 60" Diameter.

500 to 75,000 CFM
Product Features:
  • All Vinylester Construction.
  • Graphite Impregnation.
  • Surface Veil.
  • Mechanical Shaft Seals.
  • Stainless or Hastelloy C-276 Shafting.
  • Stanless Structurals and Guards.
  • Sound Insulation.
  • Stainless Impellers.
  • FRP Inlet Boxes.
  • FRP Dampers.
  • AMCA Tested and Rated.
  • 100,000 HR Bearing Life.
  • Direct or Belt Driven. 
  • Access Doors.
  • Drain couplings.
  • Flanges.
  • FRPSilencers.
  • FRP Sound Encloures.
  • Special Coatings.
  • FRP Transitions.
  • Flexible Connectors.
  • Isolation / Inertia / Seismic Bases.
  • Special Motors.

CMV Poly-Pro CentrifugalClick Here for PolyPro and PVC Lab or Chemical Hoods and Blowers

 

 





Fiberglass Blowers.

Composite Fiberglass / Resin Blowers specifically designed for Acid vapor resistance.  Suitable for a wide spectrum of chemically saturated and caustic rich airstream which would normally attack coated steel and stainless steel. Send an E-Mail for a chemical resistance chart used to compare Fiberglass construction against a variety of chemicals .


FRP_Blower1.jpg (220400 bytes)FRP_Blower4.jpg (98162 bytes)


Arrangement 9 Fiberglass Centrifugal Blower, CW Rotation, Up Blast Discharge with Guard removed.

Fiberglass Pressure Blower

Fan Equipment Co., Fiberglass Pressure Blower.

 Heavy duty industrial AIR MOVING EQUIPMENT:

fans and blowers – STANDARD AND CUSTOM, STEEL, fIBERGLASS, 316 ss AND aLUMINUM. INDUSTRIAL silencers, flexible duct connectors, CUSTOM ac variable speed drives AND MOTOR CONTROLS, AIR FILTERS, AIR SYSTEM DESIGN & TESTING.  REPLACEMENT PARTS, SERVICE, INSTALLATION, REPAIRS, & UPGRADES.   

fanair co., orange, ca PH (714) 744-6444 fax (714) 744-5100   

Back to main page.